How to operate instant electric water heater

1.How to work?

Instant Electric Water Heaters heat water directly without the use of a storage tank. When the flow valve switch is turned on, cold water travels through a pipe into the unit. Element will heats the water. As a result, Instant Electric Water Heater deliver a constant supply of hot water. You don't need to wait for a storage tank to fill up with enough hot water.

However, a tankless water heater's output limits the flow rate.

Typically, tankless water heaters provide hot water at a rate of 0.5–2 gallons (1.8–8 liters) per minute. Sometimes, even the largest electric water heater,cannot supply enough hot water for simultaneous, multiple uses in large households. For example, taking a shower and running the dishwasher at the same time can stretch a tankless water heater to its limit. To overcome this problem, you can install two or more tankless water heaters, connected in parallel for simultaneous demands of hot water. You can also install separate tankless water heaters for appliances -- such as a clothes washer or dishwasher -- that use a lot of hot water in your home.

2.How to operate?

Generally, when we install Electric Tankless Water Heaters, we need to strictly follow the instructions and install under the conditions of local household electricity safety.

When the water heater is installed vertically, need to connect the water pipe to the blue cold water inlet of the water heater.Open the water valve and wait until the water flows smoothly at the red hot water.Turn on the power and adjust the temperature to the temperature suitable for the season by using the touch screen or turn the knob.

Turn off instant hot water:

Turn off the power switch first, or turn the knob to OFF, and then close the water valve.

Note: If you need to leave the house for a long time, remember to turn off the air switch.